Schneider Electric HRB1684301-01 user manual Demand setup menu tree

Chapter 3—Front panel display and meter setup PowerLogic™ PM5500 series user manual

Related topics

•See “Meter configuration using ION Setup” on page 53 to set up the meter using ION Setup.

Demand setup

Demand is a measure of average consumption over a fixed time interval.

Use the Demand setup screens to define power demand, current demand or input metering demand.

Demand setup menu tree

Maint	Reset
	Setup	Meter	Basic	Adv	Dmd	Tariff

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0”), then press OK.

3.Navigate to Meter > Dmd.

4.Move the cursor to select Power Demand, Current Demand or Input Demand.

5.Move the cursor to point to the parameter you want to modify, then press Edit.

6.Modify the parameter as required, then press OK.

7.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.

Power, current, or input demand setup parameters

Parameter	Values	Description
	Timed Sliding Block
	Timed Block
	Timed Rolling Block
	Input Sync Block
Method	Input Sync Roll Block	See “Power demand” on page 115 for
	Cmd Sync Block	details.
	Cmd Sync Roll Block
	Clock Sync Block
	Clock Sync Roll Block
	Thermal
Interval	0 - 99	Set the demand interval, in minutes.
		Applies only to rolling block methods.
Subinterval	0 - 99	Define how many subintervals the demand
		interval should be equally divided into.
Select Dig Output	None, Digital Output D1, Digital	Select which digital output the end of
	Output D2	demand interval pulse should be sent to.
	None, Digital Input S1, Digital	Applies only to input sync methods.
Select Dig Input	Input S2, Digital Input S3, Digital	Select which digital input is used to sync
	Input S4	the demand.
		Applies only to clock sync methods (these
		synchronize the demand interval to the
Clock Sync Time	0 - 2359	meter’s internal clock).
		Define what time of day you want to
		synchronize the demand

8. Press Yes to save your changes.

38 HRB1684301-01