Schneider Electric HRB1684301-01 user manual Data display and analysis tools, Meter configuration

PowerLogic™ PM5500 series user manual Chapter 1—Introduction

Data recording

The meter records the following:

•Each new minimum and new maximum value with date and timestamp for all instantaneous values and for each phase

•Alarms (with 1s timestamping)

•Parameters configured for data logging

•Data, alarm history, diagnostics, and maintenance logs

Input/Output

The meter provides the status of the digital inputs and digital outputs.

Other measurements

The meter also provides the following measurements:

•I/O timer shows how long an input or output has been ON.

•Operating timer shows how long the meter has been powered.

•Load timer shows how much time a load has been running, based on the specified minimum current for the load timer setpoint setting.

Data display and analysis tools

The meter integrates seamlessly with display and analysis software available from

Schneider Electric™ such as StruxureWare™ Power Monitoring Expert and

StruxureWare™ PowerSCADA Expert.

Power Monitoring Expert software lets you analyze and monitor your system and produce reports for any department in an organization. Power Monitoring Expert is designed to make use of all the meter’s available advanced capabilities. You can also use data acquired by the meter in a variety of third-party systems.

PowerSCADA Expert lets you control your system with high reliability, performance and data integrity. PowerSCADA Expert is designed to help reduce outages and increase power efficiency. It is built to handle simple to complex user requirements.

Related topics

•See the Power Monitoring Expert and PowerSCADA Expert product pages at www.schneider-electric.com for more information.

Meter configuration

Meter configuration is performed through the display panel (if your meter equipped with it) or through PowerLogic™ ION Setup. ION Setup is a meter configuration tool that can be downloaded for free at www.schneider-electric.com.

Related topics

•See the “PM5500 series” topic in the ION Setup online help or in the ION Setup device configuration guide. To download a copy, go to www.schneider-electric.com and search for ION Setup device configuration guide.

HRB1684301-01 13