Schneider Electric HRB1684301-01 user manual Configuring digital outputs using the front panel

Chapter 8—Input / Output PowerLogic™ PM5500 series user manual

Digital output setup parameters available through ION Setup (Continued)

Parameter	Values	Description
	Over Current, Ph; Under
	Current, Ph; Over Current,
	N; Over Current, Gnd; Over
	Voltage, L-L; Under
	Voltage, L-L; Over Voltage,
	L-N; Under Voltage L-N;
	Over kW; Over kVAR; Over
	kVA; Lead PF, True; Lag
	PF, True; Lead PF, Disp;
	Lag PF, Disp; Over kW
	Dmd, Pres; Over kW Dmd,
	Last; Over kW Dmd, Pred;
Select Alarms	Over kVAR Dmd,Pres; Over	Applies when Control Mode is set to Alarm. Select
	kVAR Dmd,Last; Over	one or more alarms to monitor.
	kVAR Dmd,Pred; Over kVA
	Dmd, Pres; Over kVA Dmd,
	Last; Over kVA Dmd, Pred;
	Over Frequency; Under
	Frequency; Over Voltage
	Unbal; Over Voltage THD;
	Phase Loss; Meter
	Powerup; Meter Reset;
	Meter Diagnostic; Phase
	Reversal; Digital Alarm S1
	through S4; Custom Alarm
	1 through 5; Logic Alarm 1
	through 10
		This field displays additional information if the digital
Associations	—	output is already associated with another meter
		function.

Configuring digital outputs using the front panel

You can use the front panel to configure the digital outputs.

Digital output setup menu tree

Maint	Reset
	Setup	Meter
		Comm
		Alarm
		I/O	LED	D In	D Out	Inp Mtr

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0”), then press OK.

3.Navigate to I/O > D Out.

4.Move the cursor to point to the digital output you want to set up, then press Edit.

5.Move the cursor to point to the parameter you want to modify, then press Edit.

NOTE: If Edit is not displayed, it means the parameter is either read-only or can only be modified through software.

6.Modify the parameter as required, then press OK.

7.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.

8.Press to exit. Press Yes to save your changes.

78 HRB1684301-01