Schneider Electric HRB1684301-01 Setting the clock, Lost password, Password setup menu tree

Chapter 3—Front panel display and meter setup PowerLogic™ PM5500 series user manual

Lost password

Setting the clock

Password setup menu tree

Maint	Reset
	Setup	Meter
		Comm
		Alarm
		I/O
		HMI	Displ	Region	Pass

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0”), then press OK.

3.Navigate to HMI > Pass.

4.Move the cursor to point to the parameter you want to modify, then press Edit.

5.Modify the parameter as required, then press OK.

6.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.

Password setup parameters

Parameter	Values	Description
Setup	0000 - 9999	Sets the password for accessing the meter setup
		screens (Maint > Setup).
Energy Resets	0000 - 9999	Sets the password for resetting the meter’s
		accumulated energy values.
Demand Resets	0000 - 9999	Sets the password for resetting the meter’s
		recorded peak demand values.
Min/Max Resets	0000 - 9999	Sets the password for resetting the meter’s
		recorded minimum and maximum values.

7. Press to exit. Press Yes to save your changes.

Visit www.schneider-electric.com for support and assistance with lost passwords or other technical problems with the meter.

Make sure you include your meter’s model, serial number and firmware version in your email or have it readily available if calling Technical Support.

The Clock setup screens allow you to set the meter’s date and time.

NOTE: You must always set or sync the meter time to UTC (GMT, Greenwich Mean Time), not local time. Use the GMT Offset (h) setup parameter to display the correct local time on the meter.

44 HRB1684301-01