Schneider Electric HRB1684301-01 user manual Timer, Maint, Led

Chapter 7—Viewing meter data PowerLogic™ PM5500 series user manual

Timer

Timer

Load

Oper

Timer

Load

Oper

Real-time counter that keeps track of the total number of days, hours, minutes and seconds an active load is connected to the meter inputs.

Real-time counter for the total number of days, hours, minutes and seconds the meter has been powered.

Related topics

•See “Timer” on page 118.

Maintenance

Maint	Reset
	Setup		Meter
			Comm
			Alarm
			I/O
			HMI
			Clock
	Diag		Info
			Meter
			Cl Pwr
			Phasor
	Lock	(PM5561 only)

Basic	Adv	Dmd	Tariff
Serial	Enet
1-Sec	Unary	Dig	Logic	Cust1s
LED	D In	D Out	Inp Mtr
Displ	Region	Pass

Polar

Maint

Reset			Screens to perform global or single resets.
Setup			Meter configuration screens.
	Meter
			Basic: screens to define the power system and power system
			components/elements.
			Adv: screens to set up the active load timer and define the peak
		Basic, Adv, Dmd, Tariff	demand current for inclusion in TDD calculations.
			Dmd: screens to set up power demand, current demand and
			input metering demand.
			Tariff: screens to set up tariffs.
	Comm		Screens to set up serial and Ethernet communications.
		Serial, Enet
	Alarm		Screens to set up standard (1-Sec), unary, digital, logic and
		1-Sec, Unary, Dig, Logic,	custom (Cust1s) alarms.
		Cust1s
	I/O		Screens to set up the alarm / energy pulsing LED, digital inputs,
		LED, D In, D Out, Inp Mtr	digital outputs and input metering channels.
	HMI		Screens to configure display settings, edit regional settings and
		Displ, Region, Pass,	set up front panel meter access passwords.
	Clock		Screens to set up the meter date and time.
Diag			Diagnostic screens provide meter information for
			troubleshooting.
			Model, serial number, manufacture date, firmware (OS -
	Info		operating system and RS - reset system) and language versions.
			OS CRC (cyclic redundancy check) is a number that identifies
			the uniqueness between different OS firmware versions — this
			parameter is only available on certain models (e.g., PM5561).
	Meter		Displays the meter status.

66 HRB1684301-01