Door Frame
Sectioning—Outer
(Center Pillar)
Removal Procedure
1. | Remove all related panels and |
| components. |
2. | Restore as much of the damage as |
1 | possible to factory specifications. |
| |
3. | Note the location and remove the |
1 | following as necessary: |
| • |
| • Sound deadeners (1) |
| • Sealers |
| IMPORTANT: Do not damage any |
| inner panels or reinforcements. |
4. | Cut the panel where sectioning is to |
| be performed. |
5. Locate and drill out all factory welds. Note the number and location of welds for installation of the service part.
6. Remove the damaged Center Pillar.
2001 Pontiac Aztek
