Floor Panel
Replacement
Installation Procedure
IMPORTANT: In any area damaged beyond recognition, space plug weld holes every 40 mm
1.Drill 8 mm (5/16 in.) plug weld holes as necessary in locations noted from the original rear outer wheelhouse.
2.Drill 8 mm (5/16 in.) plug weld holes at the forward edge of the rear floor panel.
3.Prepare all attachment surfaces as necessary.
4.Apply
5.Position the rear floor panel to overlap the
6.Plug weld accordingly.
7.Drill 8 mm (5/16 in.) plug weld holes in the service part as necessary in locations noted from the original panel.
8.Position right and left lower reinforcements to the rear body opening.
9.Plug weld accordingly.
