Door Frame
Sectioning—Outer
(Rear Lock Pillar)
Removal Procedure
1.Remove all related panels and components.
2.Restore as much of the damage as
possible to factory specifications. | 1 | |
| ||
3. Note the location and remove the | 1 | |
following as necessary: | ||
|
•
•Sound deadeners (1)
•Sealers
IMPORTANT: Do not damage any inner panels or reinforcements.
4.Cut the panel where sectioning is to be performed.
5. Locate and drill out all factory welds. Note the number and location of welds for installation of the service part.
6. Remove the damaged Rear Lock Pillar.
