![](/images/new-backgrounds/1305073/30507349x1.webp)
1
1
1
1
2
30mm | 30mm |
(1 3/16 IN) |
(1 3/16 IN)
Door Frame
Sectioning—Outer
(Rocker Sectioning)
Removal Procedure
1.Remove all related panels and components.
2.Restore as much of the damage as possible to factory specifications.
3.Note the location and remove the following as necessary:
•
•Sound deadeners (1)
•Sealers
4.By measuring from the lower edge of the guide hole (1) downward 30 mm
5.With quarter panel removed (2), locate and mark for sectioning of the Rear Lock Pillar.
6.Scribe a line horizontally to the rocker.
IMPORTANT: Do not damage any inner panels or reinforcements.
7.Cut the panel where sectioning is to be performed.
2001 Pontiac Aztek