Pontiac 2001 manual Floor Panel Replacement, Removal Procedure

Floor Panel

Replacement

Removal Procedure

1.Remove all related panels and components.

2.Restore as much of the damage as possible to factory specifications.

3.Note the location and remove the following as necessary:

•Anti-corrosion materials

•Sound deadeners

•Sealers

IMPORTANT: Do not damage any inner panels or reinforcements.

4.Locate and drill out all factory welds. Note the number and location of welds for installation of the rear body opening right and left lower reinforcements, gaining access to the rear floor panel.

5.Locate Rear Floor Panel to mid- floor overlay seam.

6.Cut rearward of the mid-floor. Use a straight line to cut Rear Floor Panel.

—continued

1-382001 Pontiac Aztek