Precor EFX 5.21, EFX 5.23 manual Obtaining Service, Unpacking the Equipment, Required Tools

Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly instructions. If you do not assemble the EFX according to these guidelines, you could void the Precor Limited Warranty.

Obtaining Service

You should not attempt to service the EFX except for maintenance tasks described in the owner’s manual. Should you need more information regarding Customer Support numbers or a list of Precor authorized Service Centers, visit the Precor web site at www.precor.com.

Unpacking the Equipment

The EFX is carefully tested and inspected before shipment. The unit is shipped in one box. Ask for help to unpack and assemble the EFX. If any items are missing, contact your dealer.

Important: (240 volt 5.23 model only) If the power cord attached to your equipment is not compatible with your local power plug standards, the container should also include a power cord for your region. You will need to install this cord in place of the one attached to the equipment. If you need such a cord and it was not included with your EFX, please contact your Precor dealer for the correct Precor power cord. For a list of authorized Precor dealers in your area, please contact Customer Support at www.Precor.com.

Required Tools

•Wire cutter

•Rubber mallet (EFX 5.23 only)

•Philips head screwdriver

Installation Requirements

Follow these installation requirements when assembling the unit:

•Assemble the EFX in the location where you plan to use it. No rollers or wheels exist on the EFX, so it is not easy to move once it is fully assembled.

•Provide ample space around the unit.

Important: Consult your owner’s manual for proper placement of your equipment.

•Set up the unit on a solid, flat surface.

A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions.

•Open the box and assemble the components in the sequence presented in this guide.

•Obtain assistance.

Ask another capable adult for assistance during the assembly process.

•Use your fingers or the appropriate tools to insert fasteners. Proper alignment helps alleviate cross-threading. Do not fully tighten fasteners until instructed to do so.

When fully tightened, the head of the fastener should be flush with the product. If it is not, cross-threading has occurred. Do not attempt to rework the assembly as more damage to the equipment will occur. Contact Customer Support. Refer to Obtaining Service.

EFX 5.21/ 5.23 Elliptical Fitness Crosstrainer Assembly Guide 1