Chapter 2
Setting Up the Console
Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment.
The System Settings categories are:
Club Parameters
Informational Display
System Settings
System Setting features remain hidden from club patrons and can only be accessed using special keypresses. To view the System Settings, the equipment must be in the Welcome state. The equipment is in the Welcome state when it is on, but not actually in use. This means that there is no exercise session, data entry, or diagnostic operation in progress.
When the equipment is in the Welcome state:
SELECT A WORKOUT OR PRESS QUICKSTART TO BEGIN scrolls in the text display.
On the treadmill, the belt is not moving and the lift motor is off.
Note: On
The changes made in System Setting modes become the default settings when the display resets to the Welcome banner.
CAUTION: If you change the Unit of Measure display on the treadmill, check the speed setting to verify that it is correct.
