Precor P10 manual Hardware Kit not to scale, Fasteners

Assembling the Treadmill 19

Hardware Kit (not to scale)

The hardware kit shipped with this equipment contains the fasteners and other hardware components shown in the following table. Before you begin assembly, make sure that your hardware kit is complete. If not, please contact Precor Customer Support.

Fasteners	Quantity
⁵₁₆-inch x ³₄-inch socket	8
head screws
⁵₁₆-inch x ³₄-inch	6
buttonhead screws (zinc
finish)
⁵₁₆-inch x ³₄-inch	4
buttonhead screws (black
finish)
Flat head hex drive screws	4
(¹₄-inch x ⁵₈-inch)
⁵₁₆-inch locknuts with star	4
washers
⁵₁₆-inch split lock washers	10
⁵₁₆-inch flat washers (zinc	6
finish)
⁵₁₆-inch flat washers	12
(black finish)

Note: Retrieve the cables and other hardware shipped with the console before you begin installation.