Precor P10 manual Console positioning on base unit

Installing the Console 35

3.Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure.

Figure 17: Console positioning on base unit

4.Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so.

5.Using a #2 Phillips screwdriver, remove the two #8-32 x ¹₂” pan-head machine screws securing the upper back cover of the fairing, as shown in the previous figure. Set the cover and the screws aside.