Printronix Network Interface Card NOTE:, *SAME, identifier, point-size, Font Identifier (FONT) - Help, Figure 41. Example of CHGDEVPRT Command

Font Identifier (FONT) - Help

Text ‘description’	TEXT	‘Device created for
		S1045PXM.’
Workstation customizing object	WSCST	*NONE
Library

Figure 41. Example of CHGDEVPRT Command

Font Identifier (FONT) - Help

Specifies the font identifier used by the 3812, 3816, and 5219 printers (including ASCII printers emulating the 5219 printer), and the IPDS printers.

The Printer Font Table (Font Parameter) in the CRTDEVPRT command lists the valid font identifiers, the display values, the characters per inch value implied with each font style, a description of each font style, and whether the font is supported on a particular printer.

NOTE: Some fonts may be substituted by the printer. Consult the various printer reference guides of details.

The possible values are:

•identifier. Specify the 3-, 4-, or 5-digit identifier associated with this printer.

•point-size. Specify a point size ranging from 0.1 through 999.9. If you do not specify a point size, the system will set one.

•*SAME. This value does not change.

The print quality/typeface setting in TN5250 mode is NOT set by the TN5250 data stream. It is only set through the front panel. This is true regardless of the front panel TN5250 Host Override setting.

299