Printronix Network Interface Card To Create An Automatic Remote Output Queue, *YES, bold, OUTQ, NOTE:, *OTHER, CRTOUTQ, *INTNETADR, > USERNAME, Output queue, Transform (TRANSFORM)

Chapter 10 Configuring The AS/400 For Printing

Destination Type (DESTTYP)

Specify *OTHER for the DESTTYP parameter.

Transform (TRANSFORM)

Specify *YES.

Manufacturer Type and Model (MFRTYPMDL)

Select a manufacturer type and model. This is the name of the WSCO. Select *IBM6400EP for Epson emulation or *IBM6400 or *IBM42023 for Proprinter Emulation if you have AS/400 V3R2 and above or V3R7 and above.

Internet Address (INTNETADR)

The IP address of the NIC.

NOTE: You may specify either *INTNETADR (and the NIC IP address) or the hostname for the NIC (if you added the printer to the host table entry as directed in “Configuring A TCP/IP Host Table Entry” on page 233).

To Create An Automatic Remote Output Queue

1.From the AS/400 command line, enter CRTOUTQ.

2.Figure 29 displays in bold the parameters you need to specify.

Send TCP/IP Spooled File (LPR)
Type choices, press Enter.
Output queue	OUTQ	> USERNAME
Library		*CURLIB
Maximum spooled file size:	MAXPAGES
Number of pages		*NONE
Staring time

236