HTML Forms

The SSID of the Print Server must be configured to match the Access Point’s SSID which also has Kerberos enabled. For example, if a Windows 2000 user created the password aBcd-12345 and the Access Point’s realm is set to REALM.PRINTRONIX.COM, the following telnet commands are used:

store kerberos password aBcd-12345

store kerberos config krealm REALM.PRINTRONIX.COM

NOTE: If the Kerberos authentication fails, the user will not be able to Telnet to the Print Server via the wireless LAN interface. In this case, Telnet to the Print Server via the wired LAN interface. It should display an error message indicating the reason for the Kerberos authenticaion failure.

HTML Forms

The NIC settings can be configured over TCP/IP through a standard Web browser. The NIC Web pages provide a way to access some of the commands built into the print server.

NOTE: If a router is used, make sure a Gateway value is configured.

To access the NIC home page:

1.Make sure the print server has an IP address and Subnet Mask so it is recognizable on your TCP/IP network.

2.Make sure your network station can successfully ping the NIC over the network.

3.Direct your Web browser to the URL: http://IPaddress

(e.g., http://192.75.11.9)

where IPaddress is the IP address of your NIC.

NOTE: If you cannot access the web page, refer to “Web Browser/ HTTP Problem” on page 124

51