Printronix Network Interface Card root, root, NOTE:, ENTER, NOTE:, ENTER, reset, SUBMIT, Telnet, telnet, ipaddress, NICIPaddress, store pserver name name, http://NICIPaddress/adminConf.html

Changing The NIC Name (NDS And Bindery Setups)

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://NICIPaddress/adminConf.html

(e.g., http://192.75.11.9/adminConf.html).

NOTE: If prompted for a User ID and password, type in root for the ID and press ENTER at the password prompt (since there is no password by default).

3.Look under the System Information section and enter the new name into the Name field.

4.Click SUBMIT when done and physically repower the printer to make the new settings take effect.

Manual (Telnet) Method

1.Telnet to the print server: telnet ipaddress

NOTE: If prompted for a User ID and password, type in root for the ID and press ENTER at the password prompt (since there is no password by default).

2.You should see a prompt with the NIC IP address: ipaddress:root>

3.At the prompt, enter:

store pserver name name

4.Reset the unit to ensure the changes take effect. reset

179