Windows XP/2000 Host Setup

11.Complete the Port Settings tab as desired:

•Raw. (The default.) Make sure “Raw” is selected in the “Protocol” field. Leave the setting at 9100 (the default) in the “Raw Settings Port Number” field.

•LPR. To select the LPR setting, click LPR in the “Protocol” field. In lowercase characters, type the desired queue name of d1prn through d8prn in the “LPR Settings Queue Name” field.

•SNMP Status Enabled. Check the SNMP Status Enabled box if you want the status returned using SNMP. You must also enter the appropriate information in the “Community Name” and “SNMP Device Index” fields.

Upon completion, click OK. The Port Settings text box disappears and the Additional Port Information Required text box reappears.

107