Chapter 15 Complete Command List

set sysinfo loginfo [-]sys [-]tcp [-]ipx [-]spx Example: set sysinfo loginfo -sys ipx

Set the NIC debugging information type. Usually this information includes unexpected errors or exceptions from the print server divided into these groups:

sys

General system messages

tcp

TCP stack messages

ipx

IPX stack messages

spx

SPX stack messages

NOTE: This is not printer or job logging information.

set sysinfo logport nullprnsyslog Example: set sysinfo logport null

Define to where the debugging information should be sent. This can be sent to an output device off of the NIC I/O port or to a central TCP/IP host running a SYSLOG daemon. To set this host, use the command set sysinfo syslog hostIPaddress.

set sysinfo smtp <IPaddress> [port <portnum>] Example: set sysinfo smtp 192.75.11.5 port 25

Define the SMTP (Simple Mail Transfer Protocol) server IP address or domain name and port number where the mail is stored on your network.

Default: Unconfigured, 25

set sysinfo email <email>

Example: set sysinfo email JohnDoe@Printronix.com

Define the user email address to receive printer and job logging information from a particular logpath on the NIC. Email name is the host or IP name of the user.

Default: Unconfigured

set sysinfo email emailname@domain

Example: set sysinfo email joe@printronix.com

Define the user email address to receive printer and job logging information from a particular logpath on the NIC.

332