Printronix Network Interface Card set snmp email <index> [-]active, set snmp shortmsglen <index> <length, set snmp emailformat <index> [-]short, Example: set snmp alerts 1 warning -cutter]

Chapter 15 Complete Command List

set snmp emailformat <index> [-]short

Enable or disable the short e-mail message format for an SNMP alert table entry. When enabled, the short e-mail format can be used when messages will be viewed on devices having a limited display size (a cellular phone or pager, for example).

<index> is the index number of the SNMP alert table. “short” enables the short e-mail format, “-short” disables it.

set snmp shortmsglen <index> <length>

Specify the length of the short e-mail message format for an SNMP alert table entry. This command is effective only when the short e-mail message format for an SNMP alert table entry is enabled.

<index> is the index number of the SNMP alert table. “length” specifies the length of the short e-mail message, and has an acceptable range of 15 to 80 characters.

set snmp email <index> [-]activeEnable or disable sending e-mail alert messages for an SNMP alert table entry.

<index> is the index number of the SNMP alert table. “active” enables sending e-mail alert mesages, “-active” disables it.

set snmp alerts <index> [-]all [[-]warning] [[-]offline] [[-]mediainput] [[-]mediaoutput] [[-]mediapath] [[-]marker] [[-]cutter] [[-]barcode] [[-]scanner] [[-]intervention] [[-]consumable] [[-]label][[-]powercart] [[-]rfid]

Example: set snmp alerts 1 warning -cutter]

Specifies which alert groups are enabled for reporting via an SNMP manager, e-mail alert message, and/or Unix syslog daemon. See Table 8 on page 81 for a description of specific printer events belonging to each group.

The index is the index number of the SNMP manager/alert table.

330