Printronix Network Interface Card Printer Sharing Parameters, V3R2, V3R2, AS/400, RLSTMR, *SEC15, Version, *NORDYF, Where Set, Parameter, CRTPSFCFG, CHGPSFCFG, CRTPSFCFG, ACTRLSTMR, CHGPSFCFG

Chapter 11 Sharing The AS/400 Printer On The NetworkPrinter Sharing ParametersTo set up AS/400 for printer sharing, set the following parameters.Table 11. Printer Sharing

AS/400	Where Set	Parameter	Recommended	Description
Version			Value
V3R2	CRTPSFCFG	RLSTMR	*NORDYF	Specifies the point at
	CHGPSFCFG			which the release timer
				(RLSTMR) is activated.
				Set to *NORDYF. This
				means that the release
				timer is activated when
				there are no spooled
				files in the printer’s
				output queue with a
				status of RDY and the
				last page of the last
				spooled file processed
				has printed. *NORDYF
				is used so that all files
				with a status of RDY are
				printed before releasing
				the session (which does
				not terminate the
				writer).
V3R2	CRTPSFCFG	ACTRLSTMR	*SEC15	Specifies the amount of
	CHGPSFCFG			time to wait before a
				session or dialog is
				released without
				terminating the writer.
				The ACTRLSTMR
				parameter specifies
				when this timer is to be
				activated. Set the
				parameter to a value at
				least equal to the
				TIMEOUT value on the
				printer. The
				recommended value is
				*SEC15.

270