Printronix Network Interface Card LEAP Parameters, Open, LEAP, Shared, (01-15), (16-30), (31-32), (01-15), (16-30), (31-32), Kerberos, LEAP User, Auth Method, LEAP Username, LEAP Username

Wireless NIC Configuration Using The Control Panel

LEAP Parameters

LEAP is a Cisco wireless security scheme. The Cisco LEAP allows for a WEP key timeout that forces re-authentication, resulting in the derivation of a new WEP key for the session.

•Auth Method. This feature allows the user to select the authentication method used for the wireless network interface.

•Open (the default). Selects open authentication.

•Shared. Selects shared key authentication.

•Kerberos. Selects Kerberos authentication (for use when a Symbol RF card is installed).

•LEAP. Selects LEAP authentication (for use with a Cisco RF card installed).

•LEAP Username

•LEAP Username (01-15). The first 15 characters of the LEAP user name (maximum number of characters is 32).

•LEAP Username (16-30). Characters 16 to 30 of the LEAP user name (maximum number of characters is 32).

•LEAP User (31-32). Characters 31 to 32 of the LEAP user name (maximum number of characters is 32).

•Reset LEAP User. Resets the LEAP user name to an empty string.

•LEAP Password

•LEAP Password (01-15). The first 15 characters of the LEAP password (maximum number of characters is 32).

•LEAP Password (16-30). Characters 16 to 30 of the LEAP password (maximum number of characters is 32).

•LEAP Password (31-32). Characters 31 to 32 of the LEAP password (maximum number of characters is 32).

•Reset LEAP Pswd. Resets the LEAP password to an empty string.

45