Printronix Network Interface Card Removing Preferred File Server

Chapter 7 Novell NIC Configuration (10/100Base-T)

Removing Preferred File Server

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://NICIPaddress/networkConf.html

(e.g., http://192.75.11.9/networkConf.html).

NOTE: If prompted for a User ID and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default).

3.Look under the Novell section and remove the name of the preferred file server from the File Server field.

4.Click SUBMIT when done and physically repower the print server to make the new settings take effect.

Manual (Telnet) Method

1.Telnet to the print server: telnet ipaddress

NOTE: If prompted for a User ID and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default).

2.You should see a prompt with the NIC IP address: ipaddress:root>

3.At the prompt, enter:

store pserver novell fserver del fservername where fservername is the name of the Novell file server you want to remove as a preferred file server.

4.Reset the unit to ensure the changes take effect. reset

174