Printronix Network Interface Card Setting The NIC Preferred NDS Tree (NDS Setups), root, root, NOTE:, ENTER, reset, NOTE:, ENTER, Telnet, telnet, SUBMIT, ipaddress, NICIPaddress

Setting The NIC Preferred NDS Tree (NDS Setups)

Manual (Telnet) Method

1.Telnet to the print server: telnet ipaddress

NOTE: If prompted for a User ID and password, type in root for the ID and press ENTER at the password prompt (since there is no password by default).

2.You should see a prompt with the NIC IP address: ipaddress:root>

3.At the prompt, enter:

store pserver novell context context

4.Reset the unit to make the changes take effect: reset

Setting The NIC Preferred NDS Tree (NDS Setups)

The NIC supports Novell environments that have multiple trees. If your environment has more than one tree you may want to set a preferred tree. By default, the NIC will try to log in to each tree it finds until it is successful.

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://NICIPaddress/networkConf.html

(e.g., http://192.75.11.9/networkConf.html).

NOTE: If prompted for a User ID and password, type in root for the ID and press ENTER at the password prompt (since there is no password by default).

3.Look under the Novell section and enter the preferred tree in the NDS Preferred Tree field.

4.Click SUBMIT when done and physically repower the printer to make the new settings take effect.

183