Printronix Network Interface Card Default: enabled, store pserver from default, store pserver from current, Set all general print server settings back to factory defaults

Chapter 15 Complete Command List

store pserver smb workgrp <workgroup> Example: store pserver smb workgrp eng

Define a different Windows workgroup as defined by <workgroup> for the NIC to be visible within (should be 14 characters or less). By default, the print server only comes up within the group called “WORKGROUP.”

store pserver lpd [-]dest1default Example: store pserver lpd dest1default

If dest1default is disabled and upon verification, the printer name supplied by the LPR protocol and the destination name do not match, then an error message is returned and the service is refused. If dest1default is enabled and upon verification, the printer name supplied by the LPR protocol and the destination name do not match, then the job is automatically routed to the first destination and the service is accepted.

Default: enabledstore pserver from defaultSet all general print server settings back to factory defaults.store pserver from current

Store all current general print server settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory.

ADAPTER, store rprinter add <psname> <printer_num> <dest> WLAN Example: store rprinter add pserver1 0 d1prn

ADAPTER Add the RPRINTER settings on the NIC for a Novell environment. <psname> must be the name of an existing PSERVER.NLM on your Novell file server. <printer_num> is the printer number within this PSERVER.NLM. <dest> is the queue on the NIC where the print jobs will be sent to.

316