NDPS Configuration (Netware 4.11 And Above)

5.Select no driver in the Select Printer Drivers dialog, unless you have a driver installed into the Broker's RMS which is to be used with the printer.

Setup Using RPRINTER Mode

In this mode, an NDPS printer agent receives jobs from an NDPS client, then forwards these jobs to a printer using the RPRINTER IPX protocol.

1.The printer must first be set up to function in RPRINTER mode, selecting any desired Print Server Name and Printer Number.

2.Use Novell Printer Gateway when setting up the NDPS printer agent.

3.Select ((NONE)) for Novell PDS.

4.Select Remote (rprinter on IPX) for Port Handler.

5.Enter the Print Server Name and Printer Number from step 1 for the SAP Name.

6.Select no drivers in the Select Printer Drivers dialog unless you have a driver installed into the Broker's RMS which is to be used with the printer.

The printer will need to be rebooted to attach to the NDPS printer agent in this mode.

193