Set Commands

set sysinfo syslog hostIPaddress Example: set sysinfo syslog 192.75.11.30

Set the IP address of the host running the SYSLOG daemon. NIC debugging or print job and printer logging information can be sent to that IP address.

set sysinfo dns <IPaddress> Example: set sysinfo dns 192.75.11.2

Set your DNS server IP address so the NIC can resolve host names when used with its built-in Telnet and ping clients.

set sysinfo domain <name>

Example: set sysinfo domain printronix.com

Sets the domain name for the NIC, which when combined with the print server name, forms the fully qualified domain name of the NIC.

set sysinfo descramblekey <hexval> Example: set sysinfo descramblekey 1234

Set the key value used for descrambling print jobs that have passed through Printronix npscramble utility on a TCP/IP host. This key is a four-digit hexadecimal value obtained from the host software, npscramble. Within the npscramble source code, there is a variable called SR_KEY which contains the default key value. This can be changed to any four-digit value you would like.

set sysinfo module [[-]novell] [[-]netbios] Example: set sysinfo module -novell

Enable and disable certain network protocol stacks within the NIC. Sometimes it helps to disable any protocols you are not using on your network.

NOTE: [ - ] novell option is not available on the Integrated NIC.

set user adddel <name> Example: set user add eng

Add or remove a user on the NIC defined by <name>.

IMPORTANT Do not delete the root user, or you will be unable to configure any further settings on the print server. You will have to go back to factory defaults to correct this problem.

333