Printronix Network Interface Card Default:, Default: *NONE, Default: *LIBL, Default: disabled, store tn dest <dxprn> copytimeout, Example: store tn dest d1prn copytimeout

Store Commands

store tn dest <dxprn> WSCSTname <WSCSTname> Example: store tn dest d1prn WSCSTname *NONE

Store the queue name to which system messages will be logged.

Default: *NONE

store tn dest <dxprn> WSCSTlib <WSCSTlib> Example: store tn dest d1prn WSCSTlib *LIBL

Store the queue library to which system messages will be logged.

Default: *LIBL

store tn dest <dxprn> [-]autoconnect Example: store tn dest d1prn autoconnect

Store the state of the autoconnect flag. If the autoconnect flag is enabled the NIC tn client will attempt a connection and binding with the specified tn host automatically on power-up. This connection sequence will be repeated every 60 seconds until successful or the autoconnect flag is disabled.

See “tn dest <dxprn> start stop” command.

Default: disabled

store tn dest <dxprn> copytimeoutExample: store tn dest d1prn copytimeout 1000

Store the value of the copytimeout. When consecutive TN5250/3270 jobs are sent to the NIC, they are treated differently depending how soon they arrive. In an attempt to provide a perception of collation when multiple copies are sent from one host, if the time between jobs is less than the copytimeout value then they are treated as copies and the job is given precedence over other host documents. This keeps documents, which are sent in rapid succession together as if they were copies of the same document. A higher value improves the likelihood of collation but impacts performance.

Default: 500

321