QUICK SETUP Menu

Paper Feed Shift

This menu item represents the distance to advance a label (+ shift) or pull back (– shift) when the Tear-Off Strip, Tear-Off, Peel-Off, or Cut Media Handling option is enabled. The allowable range is –0.50 inches to the current Label Length value setting up to a maximum of 12.80 inches in 0.01 inch increments.

The default is 0.00 inches.

Label Length

In most applications, the user-selected Label Length will match the physical label length. Physical label length is the actual label length of the media installed. Following is a list of different media types:

Die cut labels: measurable length of the removable label (leading edge to trailing edge). This does not include the liner material or gap.

Tag stock with notches or holes: measurable length from the trailing edge of one notch or hole to the trailing edge of the next notch or hole.

Tag stock with black marks on the underside: measurable length from the leading edge of one black mark to the leading edge of the next black mark.

Continuous media (no label length indicators): measurable length should be within + 1 to 2% of the Label Length value entered.

Label Width

This menu item specifies the label width. The allowable range in inches is 00.1 to the maximum print width of the printer. The allowable range in millimeters is 2.5 to the maximum width of the printer.

Ver Image Shift

This menu item specifies the amount to shift an image up (–) or down (+) for precise positioning on the label. The actual height of

42

Page 42
Image 42
Printronix SL5000r manual Paper Feed Shift, Label Length, Label Width, Ver Image Shift