QUICK SETUP Menu Items
Media Handling
This menu item specifies how the printer will handle the media (labels or tag stock).
•Tear-Off Strip. Printer prints on the media and sends it out the front until the print buffer is empty, then positions the last label over the tear bar for removal.
•Tear-Off. After each label is printed, the printer positions the label over the tear bar and waits for you to tear off the label before printing the next one (on-demand printing). A “Remove Label” message displays to remind you to remove the label before the next one can be printed.
•Peel-Off. When the optional rewinder is installed, prints and peels die cut labels from the liner without assistance. The printer waits for you to remove the label before printing the next one (on-demand printing). The label liner is rewound on the internal rewinder. A “Remove Label” message displays to remind you to remove the label before the next one can be printed.
•Cut. When the optional media cutter is installed, it automatically cuts media after each label is printed or can cut after a specified number of labels have been printed using a software cut command. It cuts continuous roll paper, labels, or tag stock.
NOTE: The Cut option is hidden when RFID Reader is set to Enable in the RFID CONTROL menu.
•Continuous. Printer prints on the media and sends it out the front.
The default is Tear-Off Strip.
