QUICK SETUP Menu
Validator Funct.
This menu appears only if an online data validator (validator) option is installed.
•Enabled. The printer commands the validator to begin scanning bar codes and to report errors. The counters increment while the validator is enabled.
•Disabled.The printer will not command the validator to begin scanning bar codes and no errors will be reported. The counters will not increment while the validator is disabled.
NOTE: If you save a configuration with the validator enabled, power down and power up, and the validator is not connected or not functioning, the error message “Validator not communicating” displays briefly. The Validator menu will not display.
If the validator is installed, the default is Enable.
Active IGP Emul
This function allows you to activate any resident IGP emulation listed in the menu. The default is IGP/PGL.
There are two methods for selecting the desired emulation: directly from the printer menu or by sending a host command which will switch the emulation automatically (see the appropriate Programmer’s Reference Manual for details).
Save Config.
Allows you to save up to eight unique configurations to meet different print job requirements. This eliminates the need to change the parameter settings for each new job. The configurations are stored in memory and will not be lost if you turn off the printer.
The default is 1.
48
