Using Other Software, Intellution FIX MMI | Quantum 890 USE 155

Using Panel Software

4.2Using Other Software

4.2.1Intellution FIX MMI

The Bridge allows Windows workstations with Intellution FIX software to access Modbus devices by TCP/IP over Ethernet.

The current version of this software does not support the Modbus/TCP Unit_ID field. Therefore if you have configured the Bridge for a Slave device at its serial port, you must configure the Bridge's internal Slave Address parameter for that device. This restricts the Bridge to a single Slave device at its port.

Refer to your software product's documentation for further information.

4.2.2WinTech Modscan

WinTech supplies ModScan32 software, which can select and poll coils and registers from various Modbus RTU/ASCII and Modbus TCP devices.

This software supports the Modbus/TCP Unit_ID field, so RS±485 multiple±drop configurations are supported through the Bridge.

Refer to your software product's documentation for further information.

4.2.3Worderware MMI

The Bridge allows Windows workstations with Wonderware software to access Modbus devices by TCP/IP over Ethernet. You will need the Wonderware Modicon Ethernet I/O Server software, at version 7.0.0.15 or higher.

The current version of this software does not support the Modbus/TCP Unit_ID field. Therefore if you have configured the Bridge for a Slave device at its serial port, you must configure the Bridge's internal Slave Address parameter for that device. This restricts the Bridge to a single Slave device at its port.

Refer to your software product's documentation for further information.

47

Image 47

Quantum 890 USE 155 manual Using Other Software, Intellution FIX MMI, WinTech Modscan, Worderware MMI

Contents

Modicon Page Breite 185 mm Höhe 230 mm Breite 178 mm Höhe 216 mm Page Data, Illustrations, Alterations PrefacePage Contents Glossary Using Panel Software Modbus to Ethernet Bridge CEV 300 Bridge Applications Introducing the Modbus to Ethernet Bridge Bridging Between Multiple Modbus Networks Ethernet Overview Installation and Configuration Mapping for a Modbus Slave Mapping Modbus and IP AddressesMapping for a Modbus Master Modbus to Ethernet Bridge Modbus Ethernet Front Panel Layout Component Name Purpose Power Parameter Specification Specifications Agency Approval Parameter Specification Page Installing the Bridge Hardware Mounting the Bridge Before You Install the BridgeMounting the Bridge on the DIN Rail Connecting the Power Wiring Connecting the Power Wiring Connecting the Serial Cable RJ45 Port Connecting the Serial Cable RJ45 Port TSX Note Compatible Modbus Devices and Cables References in this figure are to the devices listed in on Modbus Cable Pinouts DB to RJ45 Adapter Kits DB9M 110 XCA 203 RS±485 RS±485 / RS±422 Connecting the Serial Cable Wiring Terminals±Wire Setting the Serial Port Switch Setting the Serial Port Switch Connecting the Ethernet Cable Connecting the Ethernet Cable Configuring the Bridge Before You Start Configuration OverviewSafety Example RS±232 Serial Terminal Emulator Properties Connecting by the RS±232 Port Telnet Host Requirement Connecting by Telnet IP Address Not Assigned Example Telnet Connection Connecting by Telnet IP Address Assigned Modbus Master Device Additional Menu Items Using the Configuration MenuConfiguration Menu Retaining the Current Value Configuration Options 1Viewing and Changing Configuration Parameters Commands Default settings, Save, Quit without save Set Netmask Option 1 Network/IP SettingsIP Address Set Gateway IP Address Configuring the Bridge Interface Type Option 2 Serial and Mode SettingsAttached Device Serial Protocol Example Option 3 Modem Control SettingsRTS/CTS Mode Slave Address Option 4 Advanced Modbus Protocol Settings Allow Modbus Broadcasts Character TimeoutMessage Timeout Example Address Mapping Option 5 Unit ID to IP Address Mapping TableHow the Address Mapping Works Deleting a Map Entry Entering New Address MappingExiting the Mapping Menu Adding a New Map EntryPage Using Panel Software Modbus Slave Address Using Concept or ModsoftSoftware Versions Worderware MMI Using Other SoftwareIntellution FIX MMI WinTech ModscanPage Glossary Framing types Default gatewayField Frame Network InternetLayer MAC Address Server SwitchRepeater Router Winsock UTPPage United States France Germany