Installation Instructions
Clear CMOS (JCC)
If you want to clear CMOS, unplug the AC power supply first, close JCC (pin1 & pin2) once, set JCC back to the normal status with pin2 & pin3 connected, then power on the system.
Normal status | 1 |
| |
2 | JCC | ||
(default) | |||
3 |
| ||
| 1 |
| |
Clear CMOS | 2 | JCC | |
3 | |||
|
|
(Unplug the AC power supply)
CPU Core Voltage Setting (JVID0~4)(optional)
The Jumpers JVID0~4 allow you to adjust the CPU Core Voltage Manually to improve the CPU performance. But, we strongly recommend you not to adjust it unless you know the CPU well. If the jumpers are set as Auto, the system will detect the CPU core voltage automatically.
“Auto”: pin1 and pin2 of JVID0, JVID1, JVID2, JVID3 and JVID4 closed(default);
“0”: pin2 and pin3 closed;
“1”: pin1, pin2 and pin3 opened.
1
2
3
1
2
3
JVID4 | JVID3 | JVID2 | JVID1 | JVID0 |
Manual for PlatiniX 2 series
