Appendix
LogoEasy
When you power on or reset your system, the picture shown below will be displayed on the screen.
You can use “CBLOGO.EXE” ( included in the QDI Driver CD ) to replace it by any other logo which you prefer.
Please follow the steps to use CBLOGO.EXE Utility:
1.Copy “CBLOGO.EXE”and “AWDFLASH.EXE” from the directory \Utility located on QDI Driver CD to your hard disk.
2.Get the BIOS file from “AWDFLASH.EXE” or Download the BIOS file from the Website (http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your hard disk.
3.Boot the system into DOS environment, Put your favor picture into BIOS file by “CBLOGO.EXE” command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4.Flash the BIOS to motherboard by “AWDFLASH.EXE”. For example: AWDFLASH xxxxxx.bin
Reboot the system, you can see the new picture displayed on the screen. If you require more parameters information concerning “CBLOGO.EXE”, please refer to the online help. If you don’t prefer the logo displayed on the screen during bootup, set the “Show Bootup Logo” option as Disabled in the “ADVANCED BIOS FEATURES ” section of the BIOS.
*We reserve the right of modifying the default
Manual for PlatiniX 2 series
