BIOS Description
#"Onboard/CNR LAN ""Selection
#IDE HDD Block Mode
#KBC input clock
#Power On Function
#KB Power ON Password
#Onboard FDC Controller
#Onboard Serial Port 1/2
#UART Mode Select
#RxD, TxD Active
#IR Transmission Delay
#UR2 Duplex Mode
#Use IR Pins
Auto
Onboard
Ext.CNR
Enabled
Disabled
6/8 MHz 12/16 MHz
Button only Password
Enter
Enabled
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3 Auto
Disabled
Normal, IrDA
ASKIR
Hi, Lo/Lo, Hi Lo, Lo/ Hi, Hi
Enabled
Disabled
Half
Full
If a CNR Interface is enabled, the onboard LAN will be automatically disabled. Otherwise, the onboard LAN is enabled.
The onboard LAN is enabled. CNR Interface is enabled.
Allow IDE HDD to read/write several sectors once.
IDE HDD only reads/writes a sector once.
Set the PS/2 Keyboard input clock as 6/8/12 /16MHz.
Power on by power button.
Power on with keyboard password.
Enter keyboard password.
Onboard floppy disk controller is enabled. Onboard floppy disk controller is disabled.
Define the onboard serial port address and required interrupt number.
Onboard serial port address and IRQ are automatically assigned.
Onboard serial port is disabled.
Set UART mode.
Default is recommended.
Enable IR Transmission delay function. Disable IR Transmission delay function.
Default is recommended.
Default is recommended.
Manual for PlatiniX 2 series
