Quantum PlatiniX 2 manual Video, Halt On, Memory

Chapter 3

Video

Set this field to the type of video display card installed in your system.

EGA/ VGA	Enhanced Graphics Adapter / Video Graphic Array. For EGA,
	VGA, SEGA, SVGA, or PGA monitor adapters.
CGA 40	Color Graphic Adapter, powering up in 40 column mode.
CGA 80	Color Graphic Adapter, powering up in 80 column mode.
MONO	Monochrome adapter, including high resolution monochrome
	adapters.

Halt On

This category determines whether or not the computer will stop if an error is detected during powering up.

	No errors	The system boot will not stop for any errors that may be
		detected.
	All errors	Whenever the BIOS detects a non-fatal error, the system will
		stop and you will be prompted.
All, But Keyboard		The system boot will not stop for a keyboard error; but it will
		stop for all other errors.
	All, But Diskette	The system boot will not stop for a disk error; but it will stop
		for all other errors.
	All, But Disk/Key	The system boot will not stop for a keyboard or disk error, but it will
		stop for all other errors.

Memory

This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS.

Base Memory	The POST of the BIOS will determine the amount of base
	(or conventional) memory installed in the system.
Extended Memory	The BIOS determines how much extended memory is
	presented during the POST.
Total Memory	Total memory of the system equals the sum of the above
	memory.

Manual for PlatiniX 2 series