Quantum PlatiniX 2 manual FAT32 after entering OS

Appendix

Note:

a. During the process of partition backup or recovery, a guage will be shown as below, the backup or recovery speed is about 4-5Mbyte/s. See figure-4.

figure-4 Backup Partition

b. If a disk I/O error occurs during the process of partition backup or recovery, this means there’s physical damage on the hard disk, however users can ignore it and continue the process.

2.3 ATTRIB PAR

Function	: Allows users to modify the properties of the partition (eg. FAT16 ->
	FAT32) after entering OS.
Limitation : None.
Steps	: After pressing this button, turn on/off the switch.
Note:

a. The switch resets to the default setting “disable” every time the system reboots. b. In order to implement this function, users need to enable the switch when install-

ing the OS or modifying the partition properties. Please note: Do not create or delete partitions or change the partition size when modifying the partition properties.

2.4 BACKUP CMS

Function	: Backups all CMOS settings.
Limitation : None.
Steps	: After choosing this function, the current CMOS settings will be saved.
2.5 RE-CVR CMS
Function	: Recovers all CMOS settings.
Limitation : None.
Steps	: After choosing this function, the latest backup of the CMOS settings
	will be recovered. The system needs reboot in order to validate the
	new CMOS settings.
Note	: If users have never backuped the CMOS settings, a wrong message
	will be shown after choosing this function.

Manual for PlatiniX 2 series