Chapter 2

Enable keyboard password power-on function (JKB)

The mainboard provides the advanced keyboard password power-on function. Before using this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2 & pin3 closed for disabling.

 

3

 

Disable

2

JKB

 

1

 

Enable

3

 

2

JKB

(default)

1

 

Furthermore in order to implement this function, set “POWER ON Function” to Password and enter the keyboard power-on password in the “INTEGRATED PERIPHERALS” section of the CMOS SETUP. Save and exit, then power off your system. In this case, the power button’s power-on function has been disabled.

Note:

1.If using this function, 5VSB line of the power supply should be capable of delivering enough current for all the devices connected to the keyboard port, if not, you will be unable to power up the system using the keyboard.

2.If you set JKB with pin2 & pin3 closed, set “POWER ON Function” to BUTTON ONLY, don’t set it to Password, or you’ll be unable to power up your system by the keyboard or the power button.

3.If you encounter the above problems, clear CMOS and set the jumper and BIOS option again.

Manual for PlatiniX 2 series

Page 23
Image 23
Quantum PlatiniX 2 manual Enable keyboard password power-on function JKB