4.ProgrammingtheMX-500TMtoControlYourComponents 
4.The remote will be flashing “SELECT BUTTON”. Press the device you wish to program. (For example, to program TV, press the TV button.)
5.The remote will be flashing “FROM TABLE”. Select the device from which the scanned code will be selected. (Important: If you have already relabeled your device keys, your LCD screen will not look like the illustration above. Select the appropriate LCD button for the “FROM TABLE” using the labels as shown in the illustration on page 11 of this manual. For example, if you have relabeled AUX as LIGHTS, you would still push the
6.Point the remote control toward the component and alternately press the UP (or DOWN ) button on the LCD and the Power button. If the right code number is sent, the component will turn off right after the code number is transmitted.
(Please press the UP (or DOWN ) button within 20 seconds of beginning programming, otherwise the remote will revert to the SETUP menu, and then after a period of time, it will go back to the MAIN device page.)
17
