6. Programming Macro Buttons
B. Programming Macro Functions To The Ten Device Buttons
1.Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds.
2.Press the MACRO button next to the LCD screen.
3.Important: Press the PAGE button.
4.Press one of the ten device buttons you wish to store your macro on.
5.Press the functional buttons you wish to store in the device macro button you selected in the order you want them stored. You can store up to 20 commands.
Important: Do not press the MAIN button at the beginning of your macro, or it will not work. You can use the MAIN button at any other step in your macro.
6.Be sure to end your macro on the Device page that you would like it to remain on when the macro is sent in normal use.
7.Return to Step #4 until you have programmed all of the Macros that you require.
8.Save the commands you selected to the macro button by pressing the CH UP button.
9.Once you complete the programming and wish to exit from this mode, press the MAIN button. Exit from the SET UP mode by pressing the MAIN button once again.
28
