12. Cloning MX-500™

1.Go to the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds.

2.Press the CLONE button next to the LCD screen.

3.Press either the SEND or RECV button depending upon the role of the remote control. If the MX-500TMis to be copied from, press the SEND button. If it is to be copied to, press the RECV button.

4.If you wish to clone the entire device, press the ALL button. If you wish to clone only one device at a time, press the DEVIC button.

5.If you press the DEVIC button, it will show all the devices. Press the device button you wish to clone.

6.Set the MX-500TMhead to head with another MX-500TMto be cloned from as shown below. Each unit should be in either cloning from or cloning to mode based on the above steps.

43

Page 44
Image 44
Radio Shack MX-500TM manual Cloning MX-500