9. LCD Button Editing
A. To Create or Edit Text on Function and Device Buttons
1.Enter the SETUP mode by pressing the MAIN and ENTER buttons simultaneously for three seconds.
2.Press the EDIT button next to the LCD screen.
3.Press the DEVICE button to display the function buttons for that device.
4.Press the function button on which you wish to write or edit text. You can also go to the second page of the device by pressing the PAGE button.
5.To edit DEVICE button text, skip Steps 3 & 4 and press the PAGE button before selecting the Device button.
6.The character to be changed will blink and you can change the character using the number pad buttons on the remote control. The characters assigned to each number pad button are shown below. It will be rotated to a different character each time the same number pad button is pressed.
Tip: You move the cursor left or right using the joystick. You can also delete a current character by using the cursor down of the joystick. Using the “cursor down” technique is a quick way to delete all of the text on a label.
39
