The open or closed mode is set in each channel storage bank. + or – is displayed under the channel storage bank’s number while scanning. Or, the status display shows the OPEN/CLOSED mode at the top line while the scanner is in manual mode or while the scanner is receiv- ing a signal during scanning.
When no ID code is programmed into the scanner, it re- ceives the signal in PL, DPL, LTR, MOT, or ED mode without regarding the open or closed mode. The scanner displays the detected ID code.
Mode | Open | Closed |
|
|
|
|
|
|
PL and DPL | Accepts any PL and | Accepts only the PL |
| DPL. Displays the | or DPL stored in the |
| received tone. | channel. |
|
|
|
MOT/ED/LTR | Stops on any trans- | Only stops on trans- |
| mission. If the ID is | mission if the ID is |
| stored, displays the | stored. Displays the |
| text tag, otherwise | text tag. |
| displays the talk |
|
| group ID. |
|
|
|
|
Changing the Open/Closed Mode
To change the OPEN/CLOSED mode, follow these steps:
1.Press MANUAL.
2.To select the
or 
.
3.Press FUNC then press 2. Bank OPEN or Bank CLOSED appears.
4.After that message disappears, the 10th right most digit at the top of the line of the display changes from + to – or – to +.
5.Repeat Steps
64
