RESETTING/INITIALIZING THE SCANNER
If the scanner’s display locks up or does not work proper- ly after you connect a power source, you might need to reset or initialize it.
Important: If you have problems with the scanner, first try to reset it to retain all memory. If that does not work, you can initialize the scanner; however, initializing clears all information stored in the scanner’s memory.
Resetting the Scanner
1.Turn off the scanner, then turn it on again.
2.Insert a pointed object, such as a straightened paper clip, into the reset opening on the side of the scan- ner. Then gently press and release the reset button inside the opening and the backlight lights.
Reset
Note: Pressing RESET does not clear the scanner’s memory.
Initializing the Scanner
Important: This procedure clears all information you stored in the scanner’s memory. Initialize the scanner only when you are sure the scanner is not working prop- erly.
1.Turn off the scanner, then turn it on again. Wel- come To
75
