20-522.fm Page 16 Friday, September 17, 1999 12:46 PM

3.Plug the adapter’s cigarette-lighter plug into your vehicle’s cigarette-lighter socket.

Note: If the scanner does not operate properly when you connect a DC adapter, unplug the DC adapter from the cigarette-lighter socket and clean the socket to remove ashes and other debris.

CONNECTING THE ANTENNA

Follow these steps to attach the supplied flexible antenna to the ANT jack on the top of your scanner.

1.Align the slots around the antenna’s connector with the tabs on the ANT jack.

2.Press the antenna down over the jack and turn the antenna’s base clockwise until it locks into place.

16

Page 16
Image 16
Radio Shack PRO-92 manual Connecting the Antenna