Radio Shack PRO-92 manual Changing the Display Contrast

Models: PRO-92

1 80
Download 80 pages 35.63 Kb
Page 56
Image 56

20-522.fm Page 56 Friday, September 17, 1999 12:46 PM

Note: You cannot activate the keylock when in the middle of programming.

To turn on the keylock, press FUNC then press /LIT. Keyboard Locked appears on the display for about 1 second. Keyboard Locked appears when you press any key after locking the keypad.

To turn off the keylock, press FUNC then press /LIT. The scanner beeps once and Keyboard Unlocked appears on the display about 1 second.

CHANGING THE DISPLAY

CONTRAST

1.Press MANUAL.

2.Press FUNC then press 9. Use Up/Down keys to set contrast. appears on the display.

3.Press or to select the contrast.

4.Press ENTER to set the display contrast.

CLONING THE PROGRAMMED DATA FROM SCANNER TO SCANNER

You can transfer the programmed data to and from an- other PRO-92 using the supplied clone cable. To clone the data, follow these steps.

1.Turn on both scanners.

2.Connect the supplied clone cable to each scanner’s

PC/IF jack. CLONE MODE UP to send, remove cable to exit appears.

3.Press . Yes=1, No=Other appears.

4.Press 1 to send the data to the other unit or press any other key to cancel the operation.

The scanner sends the data. To exit the clone mode, re- move the cable.

56

Page 56
Image 56
Radio Shack PRO-92 manual Changing the Display Contrast, Cloning the Programmed Data from Scanner to Scanner