Radio Shack PRO-92 manual Connecting AN EARPHONE/ Headphones, Connecting an Optional Antenna

Models: PRO-92

1 80
Download 80 pages 35.63 Kb
Page 17
Image 17

20-522.fm Page 17 Friday, September 17, 1999 12:46 PM

Connecting an Optional Antenna

The antenna connector on your scanner makes it easy to use the scanner with a variety of antennas, such as an external mobile antenna or outdoor base station antenna. Your local RadioShack store sells a variety of antennas.

Always use 50-ohm coaxial cable, such as RG-58 or RG- 8, to connect an outdoor antenna. For lengths over 50 feet, use RG-8 low-loss dielectric coaxial cable. If your antenna’s cable does not have a BNC connector, you will also need a BNC adapter (also available at your local Ra- dioShack store).

Follow the installation instructions supplied with the an- tenna, route the antenna cable to the scanner, then con- nect it to the ANT jack.

Warning: Use extreme caution when installing or remov- ing an outdoor antenna. If the antenna starts to fall, let it go! It could contact overhead power lines. If the antenna touches a power line, contact with the antenna, mast, ca- ble or guy wires can cause electrocution and death! Call the power company to remove the antenna. Do not at- tempt to do so yourself.

CONNECTING AN EARPHONE/ HEADPHONES

For private listening, you can plug an earphone or mono/ stereo headphones (not supplied), available at your local

RadioShack store, into the jack on top of your scan- ner. This automatically disconnects the internal speaker.

17

Page 17
Image 17
Radio Shack PRO-92 manual Connecting AN EARPHONE/ Headphones, Connecting an Optional Antenna