20-522.fm Page 47 Friday, September 17, 1999 12:46 PM

Weather Alert Feature

This scanner can detect both the weather alert tone and can decode the digital SAME message that precedes each alert. If you are monitoring a weather channel when an alert is broadcast, the scanner sounds an alert and displays the type of alert being broadcast.

The weather service precedes each weather alert with a digitally-encoded SAME signal, then a 1050 Hz tone. The PRO-92 responds to each signal. You can receive weath- er alerts any of three ways.

Press WX to listen to the weather channel.

Note: The scanner only responds to the SAME sig- nal in this mode.

Select a weather channel as the priority channel, then turn on the priority feature.

Note: The scanner only responds to the 1050 Hz tone in the mode.

Press FUNC then WX to select the WX STANDBY mode.

Notes:

The scanner responds to either the SAME mode or 1050 Hz tone in this mode.

In the WX STANDBY mode, the scanner remains muted until it receives an alert on the current weather channel.

When it decodes SAME, it displays the specific type of weather event (or Tune to TV or Radio) if it does not recognize the event code. When it detects the 1050 Hz tone, it displays Weather Alert? In either case, the scanner also sounds an alert tone.

To obtain SAME codes, visit the National Weather Ser- vice web site at:

http://www.nws.noaa.gov/nwr/indexnw.htm#sametable

47

Page 47
Image 47
Radio Shack PRO-92 manual Weather Alert Feature