6. PROGRAMMING OPERATIONS

EO1-11095

6.21 PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)

ex.) To set 10% on [%+] Key:

Mode Lock: SET, enter 10, depress [%+].

ex.) To set 5% on [%-]Key:

Mode Lock: SET, enter 5, depress [%-].

To reset the rate once set:

Enter 0, depress the required % key.

(Then the % key will always require a manual rate entry in sale entries.)

NOTE: When two [%+] keys or two [%-]keys are installed on the keyboard, two different % rates (one for each) may be preset, in the same manner as described above. The two rates may be the same or different from the other. Or only one key may be preset with a rate and other may remain non-preset.

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

12-19-1994 MON #1

 

P00

%+

10%

Open

 

Closed:

0037

12-19

 

P00

%-5%

0038

6.21PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)

If any of [ST1/TL] (or [SI/TL]) and [SI2/TL] keys are installed on the keyboard, a preset rate may be programmed on each key.

As for the functions and applications of the Selective Itemizers, refer to the description below.

CONDITION

Any time outside a sale

 

OPERATION

Mode Lock: SET

 

Preset Rate of SI 1

 

[SI1/TL] (or [SI/TL])

 

 

......

 

 

(0,001 to 99,999 (%);

use the [ . ] key if a decimal portion is contained.)

......

 

 

Preset Rate of SI 2

 

[SI2/TL]

 

ex.) To set 7% as SI 1 preset % rate: Mode Lock: SET

7[ST1/TL]

NOTES: 1. Whether the calculated amount by the preset SI % rate affects (i.e. add to or subtract from) the sale total is determined by a program option.

2. To reset the rate once set, enter 0 as the rate. (Then the rate is regarded as 100% if the option “Non-affect” is selected. With the option “SI Affects Sale Total”, some rate other than “0” should be programmed.)

TEC STORE

1343 PEACH DRIVE PHONE : 87-6437

Open 8:00am to 7:00pm Closed: every Wednesday

12-19-1994 MON #1

P00

SI1TL7%

0043

6-36

Page 141
Image 141
Toshiba MA-1450-1 SERIES Preset Rate Setting for Selective Itemizers SI1 and SI2, SI1/TL or SI/TL, SI2/TL, ST1/TL